# The parquet and wood flooring horror museum: real mistakes and how to avoid them

> Visual and technical guide to real mistakes in parquet and wood flooring: white haze, moisture, woodworm, poor sanding, faulty finishing and badly planned repairs.

URL: https://www.parksinta.com/en/blog/parquet-wood-floor-horror-museum-real-mistakes/  

---

- [![Marca de lija o parón de máquina de lijar](https://www.parksinta.com/wp-content/uploads/2015/05/Marca-de-lija-o-parón-de-máquina-de-lijar-scaled-scaled.jpg?v=20260602imgfix)](https://www.parksinta.com/wp-content/uploads/2015/05/Marca-de-lija-o-parón-de-máquina-de-lijar-scaled-scaled.jpg?v=20260602imgfix)

This museum is not a collection of anecdotes. These are real failures in parquet and solid wood flooring that we have found on site: degraded finishes, moisture, aggressive sanding, badly done filling, lack of protection and decisions that condemn a floor that could have been restored.

The point is to read the defect before deciding. A whitish floor is not always dirty. A dark stain does not always come out with sanding. An open joint should not always be filled. And an old board floor should not be removed without checking the thickness, stability and value of the wood.

![Parón de máquina de lijar en un parquet de espiga](https://www.parksinta.com/wp-content/uploads/2015/05/Marca-de-lija-o-par%C3%B3n-de-m%C3%A1quina-de-lijar.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. Sander stop mark on a herringbone parquet: the sander stopped with the drum down and left a curved dip.*

## How to read a defect in parquet

Before talking about a quote it is worth separating four layers: wood, subfloor, preparation and finish. If you only look at the surface, you risk sanding a problem that comes from below or finishing over contamination.

- **Wood:** species, usable thickness, cracks, biological attack, burns, stains and deformation.
- **Subfloor:** moisture, movement, loose pieces, battens, adhesive or screed.
- **Preparation:** sanding, vacuuming, filling, sealer, compatibility between products and timing.
- **Finish:** finish product, oil, sheen, spread rate, coats, curing, contamination and maintenance.

That reading decides what to do. Sometimes it is best to [sand and refinish](https://www.parksinta.com/en/hardwood-floor-sanding-madrid/); other times, to repair pieces, wait for the floor to dry, replace an area or keep a material that can no longer be found.

![Parquet de marquetería deteriorado con manchas, sombras y pérdida de acabado](https://www.parksinta.com/wp-content/uploads/2015/05/Museo-Horrores.jpg.webp)

*Source: ParkSinta technical archive. A visible defect is usually the last symptom. Underneath there may be moisture, an incompatible finish, an unstable subfloor or a badly planned repair.*

## 1. White haze and whitening of the finish

White haze appears when the film loses transparency and leaves a whitish layer. It is common in old finishes, especially urea-formaldehyde, and can also appear because of moisture, incompatibility or poor application.

![Suelo de tablilla con gran veladura blanca en el barniz](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-pino-melis-viejo-con-gran-veladura-urea-1024x768.jpg.webp)

*Source: ParkSinta technical archive. When the finish is degraded from within, cleaning does not solve the problem. The finish has to be removed and the system redone.*

Treating it as dirt does not fix it. If the film has changed, the real solution is removing the finish, sanding with control and applying a compatible system. For this specific case, see the guide on [whitish finish on parquet](https://www.parksinta.com/en/blog/whitish-cloudy-parquet-finish-causes-fix/).

![Detalle de la veladura blanca del barniz](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-pino-melis-viejo-con-gran-veladura-urea-2-1024x768.jpg.webp)

*Source: ParkSinta technical archive. The haze can cover the whole piece or appear in patches.*

![Tarima maciza con barniz de urea formol blanquecino](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-veladura-urea-formol.jpg.webp)

*Source: ParkSinta technical archive. In strongly colored woods, the white of the finish spoils the look of the floor considerably.*

![Parche de urea formol visible sobre parquet de roble](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-roble-tablilla-veladura-perfecta-por-parche-con-urea.jpg.webp)

*Source: ParkSinta technical archive. An incompatible patch can stand out as if it were a different piece.*

![Parquet de roble entreverado con veladura extendida](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-roble-entreverado-pegado-gran-veladura-2-1024x768.jpg.webp)

*Source: ParkSinta technical archive. When the haze is general, it is not wise to promise a spot repair.*

![Tarima de pino melis con veladura por barniz antiguo de urea](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-pino-melis-veladura-urea-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Another urea haze on pitch pine: the problem is in the film.*

![Baldosa de marquetería centenaria con veladura y daños de acabado](https://www.parksinta.com/wp-content/uploads/2015/05/Baldosa-marqueter%C3%ADa-centenaria-veladura-y-da%C3%B1os-varios-1024x768.jpg.webp)

*Source: ParkSinta technical archive. In old marquetry, the haze mixes with wear and earlier repairs.*

![Parquet de roble pegado con veladura y desgaste por uso](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-roble-pegado-velado-y-muy-usado-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Haze and wear together: bringing back the sheen does not fix it.*

![Parquet de roble entreverado con gran veladura blanca](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-roble-entreverado-pegado-gran-veladura.jpg.webp)

*Source: ParkSinta technical archive. When the defect is general, the whole finish has to be redone.*

## 2. Grease stains and contamination of the finish

Dark stains in walkways, the kitchen or by the sofa can come from grease, moisture, cleaning products or contamination that has gone through a porous or degraded finish. If it reaches the fibers, it does not always disappear with a light sanding.

![Parquet de roble en espiga con manchas oscuras de grasa](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-roble-espiga-pegado-machas-grasa-debido-a-urea-formol-2.jpg.webp)

*Source: ParkSinta technical archive. Grease absorbed into an oak parquet with an old finish.*

![Parquet de tablilla con el acabado blanquecino en una zona](https://www.parksinta.com/wp-content/uploads/2016/12/20180207_144900-1-scaled-1200x841.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. Strip parquet with a whitish finish over half its surface.*

The right decision is to do a test first. The depth of the stain, the contaminants, the compatibility of products and how the floor responds to sanding have to be checked before promising a perfect result.

## 3. Moisture: it is not fixed with a finish

Moisture is one of the most expensive mistakes to diagnose late. If the wood is deformed, separated, blackened or the adhesive has been affected, finishing over it only covers the symptom for a short time.

![Tarima maciza de roble afectada por humedad junto a una terraza](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-roble-humedad-filtraci%C3%B3n-terraza-1024x575.jpg.webp)

*Source: ParkSinta technical archive. Before sanding, you have to find where the water gets in, take measurements and wait for the floor to stabilize. Otherwise the problem comes back.*

With light moisture, drying, stabilization and restoration may be enough. With deep moisture it may be necessary to lift pieces, replace wood or rebuild the subfloor. The specific guide is in [parquet and moisture](https://www.parksinta.com/blog/parquet-y-humedades/).

![Tarima de pino melis viejo con humedad prolongada](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-pino-melis-viejo-humedad-prolongada-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Prolonged moisture changes the color, stability and strength of the wood.*

![Tarima de pino melis con humedad y restos de pegamento de moqueta](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-pino-melis-viejo-con-pegamento-de-moqueta.jpg.webp)

*Source: ParkSinta technical archive. Moisture combined with old adhesives makes sanding much harder.*

![Parquet hidráulico con brea deteriorado por humedad y sol](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-hidr%C3%A1ulico-con-brea-en-mal-estado-por-humedad-y-sol.jpg.webp)

*Source: ParkSinta technical archive. Moisture and sun can degrade finish, adhesive and tone at the same time.*

![Parquet hidráulico de castaño con mancha oscura de brea](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-hidr%C3%A1ulico-casta%C3%B1o-mancha-de-brea-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Some stains are not on the surface: you have to test before sanding everything.*

![Tarima de madera hinchada y levantada por humedad bajo un mueble](https://www.parksinta.com/wp-content/uploads/2021/01/Humedad-Madera-Hinchada-scaled-scaled.jpg.webp)

*Source: ParkSinta technical archive. When the wood swells and lifts, the problem is no longer only cosmetic: there is movement and loss of stability.*

![Cerco de humedad producido por un tiesto sobre parquet de madera](https://www.parksinta.com/wp-content/uploads/2021/01/Cerco-tiesto-parquet-mancha-scaled.jpg.webp)

*Source: ParkSinta technical archive. Plant pots and rugs can hold moisture and leave deep rings on parquet.*

## 4. Woodworm and wood-boring insects

Woodworm is not assessed only by the visible holes. You have to check whether the attack is active, its depth, the strength of the piece, the type of wood and whether the problem affects the battens or only the visible layer.

![Parquet con agujeros de carcoma y ataque xilófago visible](https://www.parksinta.com/wp-content/uploads/2015/05/Carcoma.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. If the wood has lost strength, chemical treatment does not replace a structural repair.*

Filling holes and finishing without a diagnosis does not solve it. First we confirm whether the attack is active and how far it reaches, including in the battens; whatever has lost strength is replaced.

![Detalle de ataque de carcoma en madera de parquet](https://www.parksinta.com/wp-content/uploads/2015/05/Carcoma-2-scaled-scaled.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. The visible holes are only part of the diagnosis.*

![Tabla comida por la carcoma, con galerías y restos blancos](https://www.parksinta.com/wp-content/uploads/2015/05/Carcoma-3.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. Woodworm: wood eaten away in layers, with galleries and white residue. Its strength has to be checked before restoring.*

![Tabla de pino melis nuevo con ataque de carcoma visible](https://www.parksinta.com/wp-content/uploads/2016/12/Pino-melis-nuevo-carcoma-scaled-1200x675.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. New wood is not free of risk either if infested material comes in.*

## 5. Common damage: scratches, sun, chemicals and urine

Some damage does not come from poor work but from use: deep scratches, furniture leg marks, sun fading, pet urine, nail polish remover or harsh products. The key is knowing whether they have affected only the finish or the wood as well.

![Rayas profundas en tarima de madera antes de restaurar](https://www.parksinta.com/wp-content/uploads/2015/05/Rayas-en-tarima-a-restaurar.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. A deep scratch may require taking wood down, not just renewing the finish.*

![Parquet de elondo en espiga con arañazo de pata de cama](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-elondo-pegado-espiga-con-ara%C3%B1azo-pata-cama.jpg.webp)

*Source: ParkSinta technical archive. Unprotected furniture concentrates pressure on very small points.*

![Marca de sol sobre parquet por decoloración ultravioleta](https://www.parksinta.com/wp-content/uploads/2015/05/Marca-de-sol-sobre-madera.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. UV radiation leaves clean outlines where rugs or furniture used to be.*

![Parquet de roble en damas con mancha de orina de perro](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-roble-damas-pegado-orina-de-perro-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Urine can darken the fibers and does not always disappear with a light pass.*

![Tarima de jatoba dañada por quitaesmalte de uñas](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-jatova-con-quitaesmalte-de-u%C3%B1as-1024x575.jpg.webp)

*Source: ParkSinta technical archive. Household solvents can attack the finish and the color of the wood.*

![Parquet con quemadura circular en la superficie](https://www.parksinta.com/wp-content/uploads/2016/12/20170526_125130-scaled-1200x675.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. Burns require assessing their depth before sanding.*

![Detalle de quemadura sobre suelo de madera barnizado](https://www.parksinta.com/wp-content/uploads/2016/12/20170526_125115-scaled-1200x675.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. If the burn has gone deep, it may need a graft or a spot replacement.*

![Parquet de la Facultad de Farmacia de la Complutense quemado por productos químicos](https://www.parksinta.com/wp-content/uploads/2021/01/Parquet-quemado-por-quimicos-Facultad-Complutense-Farmacia-2.jpg.webp)

*Source: ParkSinta technical archive. Parquet burned by chemicals in the Faculty of Pharmacy of the Universidad Complutense de Madrid: chemicals burn fibers and finish, and aggressive cleaning does not always remove the damage.*

![Tarima de jatoba con marca vertical por exposición prolongada al sol](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-jatova-efecto-prolongado-sol-por-cortina.jpg.webp)

*Source: ParkSinta technical archive. Jatoba with a lighter stripe where the curtain shaded it from the sun.*

## 6. Poor sanding: marks that stay under the finish

Aggressive sanding can leave stop marks, gouges, waves, edger marks or coarse-grit scratches. The finish does not hide them: on the contrary, sheen and side lighting make them more visible.

On floors with little usable thickness, every pass counts. That is why it is worth knowing [how many times a parquet floor can be sanded](https://www.parksinta.com/en/blog/how-many-times-sand-parquet-solid-wood-floor/) before repeating the work.

A stop mark happens when the machine stops with the drum down, for example when changing direction. The abrasive keeps working on the same spot and leaves a curved dip like the one in the photo at the top.

![Tarima maciza de jatoba con marcas circulares de lijado](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-jatova-marcas-lija-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Edger marks show up a lot with aggressive grit and haste.*

![Parquet de roble con mordidas laterales por lijado agresivo](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-pegado-roble-mordidas-en-laterales-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Gouges at the sides reveal a lack of control over the machine and its pressure.*

![Parquet demasiado lijado con capa útil rota y soporte visible](https://www.parksinta.com/wp-content/uploads/2014/10/Parquet-demasiado-lijado-o-fino-1200x675.jpg.webp)

*Source: ParkSinta technical archive. When the usable layer runs out, sanding further can break through the veneer or expose the subfloor.*

## 7. Badly done filling and puttying

Filling a crack is not always restoring. If the joint is too wide, if the wood moves or if the color does not match, the filler ends up looking like a scar.

![Tarima de pino melis viejo con mal emplastecido de juntas](https://www.parksinta.com/wp-content/uploads/2015/05/Mal-enmasillado-o-emplastecido-de-tarima-pino-melis-viejo-scaled-1200x675.jpg.webp)

*Source: ParkSinta technical archive. When the gap is wide or there is movement, it may be better to replace the piece than to fill it without judgment.*

On old board floors, especially pitch pine, you have to assess thickness, tongue and groove, board length and the availability of compatible wood. [Old pitch pine](https://www.parksinta.com/en/blog/reclaimed-pitch-pine-pino-melis-history-restoration/) needs a different reading from a modern floating floor.

![Machihembrado roto en tarima de pino melis con mal emplastecido](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-pino-melis-viejo-machihembrado-roto-y-mal-emplastecido.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. When the tongue and groove is broken, filler does not replace a repair.*

![Marquetería con emplastecido deficiente en juntas y piezas](https://www.parksinta.com/wp-content/uploads/2015/05/Mal-emplastecido-marqueter%C3%ADa.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. In marquetry, the color and hardness of the filler are critical.*

![Detalle de mal enmasillado en tarima antigua de pino melis](https://www.parksinta.com/wp-content/uploads/2015/05/Mal-enmasillado-o-emplastecido-de-tarima-pino-melis-viejo-2.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. The joint should blend in, not become a dominant line.*

![Tabla de pino melis con machihembrado partido](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-pino-melis-machihembrado-partido-e1432490318165.jpg.webp)

*Source: ParkSinta technical archive. A split tongue and groove limits the repair and the number of future sandings.*

## 8. Faulty finishing: waves, brush marks and reactions

A good finish applied badly can fail. Build-ups, poor spreading, contamination, poor priming, dust, moisture or wrong timing can leave waves, orange peel, whitish areas or lack of adhesion.

![Parquet con ola de barniz por mala aplicación](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-pegado-elondo-ola-barniz-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Too much product, or product badly spread, during finishing.*

![Reacción del barniz en parquet de roble tras mala aplicación](https://www.parksinta.com/wp-content/uploads/2015/05/Reacci%C3%B3n-barniz-en-parquet-roble-tras-mala-aplicaci%C3%B3n-scaled-scaled.jpg.webp)

*Source: ParkSinta technical archive. A reaction in the finish: here the problem is not fixed with another coat on top.*

Comparing products matters, but it does not replace the protocol. To choose a system, it is worth reviewing [waterborne finish versus traditional finishes](https://www.parksinta.com/en/blog/waterborne-polyurethane-finish-vs-traditional-varnish/) and the guide to [high-resistance finishes](https://www.parksinta.com/en/blog/most-durable-finish-parquet-wood-floors/).

![Huella de calzado sobre barniz fresco en parquet de roble](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-roble-pegado-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Walking on a fresh coat leaves a footprint that becomes part of the finish.*

![Rodapié blanco manchado por brochazos de barniz](https://www.parksinta.com/wp-content/uploads/2015/05/Mal-barnizado-brochazos-en-el-rodapie.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. Lack of cutting-in and protection ends up affecting baseboards and edges.*

![Tabica de escalera manchada por mal barnizado](https://www.parksinta.com/wp-content/uploads/2015/05/Mal-barnizado-tabica-escalera.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. Application mistakes also show up where surfaces meet and on stairs.*

![Parquet de damas con taco rojo sin fondo aislante antes de poliuretano](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-damas-pegado-y-taco-rojo-aplicaci%C3%B3n-sin-fondo-de-poliuretano-al-disolvente-1024x575.jpg.webp)

*Source: ParkSinta technical archive. Without an isolating sealer, some woods or stains react with the finish.*

![Detalle de parquet de damas con reacción por falta de imprimación](https://www.parksinta.com/wp-content/uploads/2015/05/Parquet-damas-pegado-y-taco-rojo-aplicaci%C3%B3n-sin-fondo-de-poliuretano-al-disolvente-2-1024x575.jpg.webp)

*Source: ParkSinta technical archive. The primer is not decorative: it prevents reactions and differences in absorption.*

![Barniz de poliuretano descamado y arrugado sobre madera](https://www.parksinta.com/wp-content/uploads/2016/02/Descamaci%C3%B3n-Barniz-Poliuretano-Disolvente-1200x675.jpg.webp)

*Source: ParkSinta technical archive. Peeling and wrinkling indicate a system failure: product, mix, subfloor or timing poorly controlled.*

## 9. Lack of protection during building work

A parquet floor can survive for decades and be scarred in a single week of building work. Plaster, cement, moisture, knocks, scuffs and alkaline residue can affect the wood and the finish.

![Parquet mal protegido durante una obra con suciedad y manchas](https://www.parksinta.com/wp-content/uploads/2015/05/Mala-protecci%C3%B3n-parquet-en-obra.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. Protection during the work must stand up to foot traffic, dust and moisture. A badly chosen tarp can also trap water.*

If there is painting, wall demolition or a renovation, the sequence matters. The article on [sanding and painting](https://www.parksinta.com/en/blog/sanding-or-painting-first-renovation/) helps order the work so damage is not repeated.

![Parquet sin proteger tras retirada de tabique en obra](https://www.parksinta.com/wp-content/uploads/2015/05/Retirada-de-tabique-en-parquet-2-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Masonry work and unprotected wood rarely end well.*

![Parquet dañado y sin protección durante retirada de tabiques](https://www.parksinta.com/wp-content/uploads/2015/05/Retirada-de-tabique-en-parquet-1024x768.jpg.webp)

*Source: ParkSinta technical archive. Taking down partition walls calls for serious covering, not improvised protection.*

![Tarima maciza de roble sin tapar durante una obra](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-roble-sin-tapar-en-obra-575x1024.jpg.webp)

*Source: ParkSinta technical archive. Oak boards left uncovered during building work, with paint splashes.*

## 10. Removing valuable wood without a diagnosis

One of the worst mistakes is not a stain but throwing away a floor that could be saved. In quality old board floors, the value lies in the section, the length, the stability and wood that can no longer be bought the same.

![Retirada de tarima antigua de pino melis viejo en buen estado](https://www.parksinta.com/wp-content/uploads/2015/05/Retirada-pino-melis-viejo-centenario-en-perfecto-estado.jpg.webp)

*Source: ParkSinta technical archive. Before removing an old board floor, you have to check whether it can be restored, pieces replaced and original material kept.*

Replacement is sometimes necessary. What it should not be is the first answer when there is thickness, stability and a fine or historic wood.

![Tablas antiguas de pino melis retiradas pese a estar recuperables](https://www.parksinta.com/wp-content/uploads/2015/05/Retirada-pino-melis-viejo-centenario-en-perfecto-estado-2.jpg.webp)

*Source: ParkSinta technical archive. Another view of old, salvageable material before it is thrown away.*

![Tarima maciza de pino tipo persianilla con abundantes nudos](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-maciza-pino-persianilla-con-nudos-1024x575.jpg.webp)

*Source: ParkSinta technical archive. Replacing fine wood with low-grade material is usually a bad decision.*

![Tarima de pino melis de baja calidad con muchos nudos](https://www.parksinta.com/wp-content/uploads/2015/05/Tarima-pino-melis-viejo-mala-calidad-nudos.jpg.webp?v=20260602imgfix)

*Source: ParkSinta technical archive. Not everything called pitch pine has the same quality or stability.*

## 11. DIY repairs on valuable floors

Tape, silicones, hard fillers, unsuitable glues and quick patches usually complicate the later restoration. What looks like a temporary fix can tear out fibers, contaminate the wood or prevent clean adhesion.

![Baldosa de marquetería antigua dañada antes de restaurar](https://www.parksinta.com/wp-content/uploads/2015/05/Baldosa-marqueter%C3%ADa-da%C3%B1ada-575x1024.jpg.webp)

*Source: ParkSinta technical archive. The damaged piece should be protected and repaired with judgment, not improvised on.*

![Baldosa de marquetería pegada provisionalmente con cinta de embalar](https://www.parksinta.com/wp-content/uploads/2015/05/Baldosa-marqueter%C3%ADa-con-cinta-de-embalar-575x1024.jpg.webp)

*Source: ParkSinta technical archive. Tape can tear out fibers, shift pieces or contaminate a later restoration.*

## 12. Closed perimeter gap: the board floor that lifts

Wood changes size with the humidity of the air: it swells when humidity rises and shrinks when it falls. That is why UNE 56810 calls for a perimeter expansion gap of 0.15% of the room’s width, hidden under the baseboard.

If the boards are laid tight against the wall, when humidity rises they have nowhere to go and the floor lifts. The remedy is to remove the baseboard and open the gap before the tongues and grooves break.

## What to do if your floor looks like one of these cases

The prudent course is not to decide from a photo. The wood, usable thickness, moisture, stability of the pieces, existing finish and the client’s goal all need checking. Sometimes sanding and refinishing is enough; other times you have to repair, wait, replace pieces or leave it alone until the origin of the problem is clear.

If the floor is stained, whitish, lifting or badly finished, we look at it on site. Depending on what we find, it is best to [sand the parquet](https://www.parksinta.com/en/hardwood-floor-sanding-madrid/), [recoat](https://www.parksinta.com/en/blog/recoating-parquet-without-sanding/) or work by areas.

### Frequently asked questions

**Can sanding marks be hidden by applying more coats of finish?**

No. The finish is transparent and copies the surface beneath it; a new coat with sheen makes the unevenness show even more. The floor has to be sanded again to get it flat.

**What should you do if a board floor starts lifting in the middle of the room?**

Remove the baseboard and check whether the boards touch the wall. If there is no gap, it has to be opened to release the stress before the tongues and grooves break.

Parquet assessment and restoration in Madrid

The assessment is done on site, before quoting: what is failing, whether it comes from the wood, the subfloor or the finish, and whether it can be restored. A similar case: [restoration of the marquetry on Calle María de Molina](https://www.parksinta.com/en/projects/marquetry-parquet-restoration-maria-de-molina-castellana/).

[Parquet Restoration and Sanding](https://www.parksinta.com/en/hardwood-floor-sanding-madrid/)
 [📞 +34 91 543 90 62](tel:+34915439062)
 [Book an appointment in Chamberí (Donoso Cortés 24)](https://www.parksinta.com/en/contact/)
