# Lightening an old parquet: what sanding removes and what it doesn’t

> Lightening an old parquet in Madrid: sanding removes darkened varnish and waxes; the tone of pitch pine is softened, not neutralized.

URL: https://www.parksinta.com/en/blog/lighten-old-parquet-floor/  
Actualizado: 2026-11-19  

---

- [![tarima pino melis juntas oscuras superficie gastada monte esquinza antes](https://www.parksinta.com/wp-content/uploads/2026/10/aclarar-parquet-antiguo/tarima-pino-melis-juntas-oscuras-superficie-gastada-monte-esquinza-antes.webp)](https://www.parksinta.com/wp-content/uploads/2026/10/aclarar-parquet-antiguo/tarima-pino-melis-juntas-oscuras-superficie-gastada-monte-esquinza-antes.webp)

**Short answer:** yes, an old parquet can be lightened. Sanding removes the old varnish, which yellows and darkens over the years, and leaves the wood clean. Then a lighter finish or stain is chosen. The tone of pitch pine can be softened without staining: with natural or ultra-matte finishes it changes quite a lot, like other woods, and with the other finishes it is softened. The result depends on the species and the state of the floor.

Six jobs serve as examples:

- [Húmera](https://www.parksinta.com/en/projects/engineered-oak-natural-finish-restoration-humera-pozuelo/) (Pozuelo de Alarcón): oak boards in a detached house.
- [Monte Esquinza](https://www.parksinta.com/en/projects/century-old-pitch-pine-floor-restoration-monte-esquinza/) (Chamberí): century-old pitch pine boards, in herringbone with a band.
- [Montalbán](https://www.parksinta.com/en/projects/century-old-pitch-pine-floor-parquet-restoration-montalban/) (Los Jerónimos): old pitch pine boards and parquet, in herringbone with a band and in straight lay.
- [Galileo](https://www.parksinta.com/en/projects/classic-pitch-pine-restoration-galileo-chamberi/) (Chamberí): old pitch pine boards.
- [La Piovera](https://www.parksinta.com/en/projects/old-pitch-pine-heavy-duty-finish-la-piovera/) (Hortaleza): large-format solid pitch pine boards.
- [Defensor del Pueblo](https://www.parksinta.com/en/projects/ombudsman-headquarters-pitch-pine-restoration/) (Spanish Ombudsman, Madrid): full restoration of a solid old pitch pine board floor.

## What comes off with sanding

An old solvent-based varnish yellows over the years, while a two-component (2K) waterborne finish stays clear. What keeps changing over time is the tone of the wood. We explain it when comparing [waterborne finish with traditional varnishes](https://www.parksinta.com/en/blog/waterborne-polyurethane-finish-vs-traditional-varnish/).

At Húmera, the oak boards had an old darkened varnish that turned the room yellow. At Monte Esquinza the varnish had darkened through oxidation, and at Montalbán there were old layers of darkened synthetic varnish.

Sanding removes that whole film until the wood is clean. A sanding takes off from about 0.8 mm to 3 mm or more, depending on the species and how flat the floor is.

At the Defensor del Pueblo, the old varnish had darkened and built up traditional maintenance waxes. In general, waxes or polishing cleaners with silicones form a barrier that keeps the new varnish from bonding. With them on the floor, recoating cannot succeed: the only lasting solution is to sand the whole room.

![Tarima de pino melis con la superficie gastada y las juntas oscuras entre las tablas, antes de restaurar](https://www.parksinta.com/wp-content/uploads/2026/10/aclarar-parquet-antiguo/tarima-pino-melis-juntas-oscuras-superficie-gastada-monte-esquinza-antes.webp)

*Monte Esquinza, another area of the apartment, before restoration: pitch pine with a worn surface and dark joints. Source: ParkSinta archive.*

![Suelo de madera de color miel, con el brillo del barniz, en una sala de paredes revestidas de madera oscura](https://www.parksinta.com/wp-content/uploads/2026/10/aclarar-parquet-antiguo/suelo-madera-barnizado-defensor-del-pueblo.webp)

*Defensor del Pueblo, another job: finished floor, with three coats of two-component (2K) waterborne finish. Source: ParkSinta archive.*

## The Húmera job

At Húmera the owners wanted to lighten the wood and get a matte finish with no artificial sheen. We applied three coats of Deva Transit Plus Natur waterborne finish, which keeps the pale tone of raw oak without altering its grain. The floor was left looking like bare wood.

[Ultra-matte](https://www.parksinta.com/blog/barniz-parquet-o-tarima-brillo-satinado-mate-2/) is a very low-sheen finish that imitates the look of freshly sanded wood, with a natural feel. On oak and other woods, for the natural and ultra-matte look we use Deva Transit Plus Natur or Bona Traffic HD Raw.

![Tarima de roble de tono claro en un pasillo entre paredes blancas](https://www.parksinta.com/wp-content/uploads/2026/10/aclarar-parquet-antiguo/tarima-roble-acabado-natural-pasillo-humera-pozuelo.webp)

*Húmera (Pozuelo): oak boards with a natural finish in a hallway. Source: ParkSinta archive.*

## Pitch pine

The mature heartwood of pitch pine has an amber tone, as we explain in the [old pitch pine guide](https://www.parksinta.com/en/blog/reclaimed-pitch-pine-pino-melis-history-restoration/). With a waterborne finish we first apply a primer that blocks tannins and resins, and each primer leaves the pitch pine a different tone. In restoration work the color test is not included as standard: it is done and quoted separately.

Pitch pine also takes drying oils and hard waxes, which do not form a film and bring out the reddish tone of the heartwood. They are touched up room by room without sanding the whole home; in hallways and high-traffic areas a high-resistance waterborne finish is more practical. If the final finish is oil or wax, switching to a finish later means sanding the whole surface.

![Suelo de pino melis en espiga, manchado de polvo y pintura, con varios tubos grises a la vista en el hueco abierto entre las piezas, junto a una puerta blanca](https://www.parksinta.com/wp-content/uploads/2026/10/aclarar-parquet-antiguo/tarima-pino-melis-conducciones-a-la-vista-monte-esquinza-antes.webp)

*Monte Esquinza, before: pitch pine boards with the service lines exposed. Source: ParkSinta archive.*

![Suelo de pino melis en espiga con faja, de tono ámbar y anaranjado, junto a un mueble blanco](https://www.parksinta.com/wp-content/uploads/2026/10/aclarar-parquet-antiguo/tarima-pino-melis-tono-ambar-monte-esquinza-despues.webp)

*Monte Esquinza, after: the same corner restored, in pitch pine boards. Source: ParkSinta archive.*

What was applied on the five pitch pine jobs:

- Monte Esquinza: resin-blocking primer and ultra-matte two-component (2K) waterborne polyurethane.
- Defensor del Pueblo: primer that blocks the natural terpene resins and matte two-component (2K) waterborne polyurethane.
- Montalbán: Deva or Bona primer and matte two-component (2K) waterborne finish.
- Galileo: tannin-blocking primer and two-component waterborne finish.
- La Piovera: Deva or Bona primer and matte waterborne polyurethane with high scratch resistance.

## Oak, chestnut and walnut

Old pitch pine is the most common wood in these floors; there is also chestnut, oak and walnut. With natural or ultra-matte finishes, they all change tone quite a lot, and with the other finishes the tone is softened.

![Suelo de tarima de castaño con cenefas de roble y nogal en una sala con paredes de madera](https://www.parksinta.com/wp-content/uploads/2026/10/aclarar-parquet-antiguo/tarima-castano-cenefas-roble-nogal-alcala-56.webp)

*Alcalá 56 (INGESA and AESAN): chestnut boards with oak and walnut borders. Source: ParkSinta archive.*

What was applied on other jobs:

- [Ministerio de Justicia](https://www.parksinta.com/en/projects/chestnut-flooring-restoration-ministry-of-justice-san-bernardo/) (Ministry of Justice, San Bernardo): chestnut boards. Sanding removed the dark varnish without taking off sound wood, with an anti-tannin sealer and three coats of two-component (2K) waterborne finish.
- [Alcalá 56](https://www.parksinta.com/en/projects/classical-chestnut-marquetry-alcala-56/) (INGESA and AESAN): chestnut boards with oak and walnut borders, with a primer to neutralize the chestnut tannins and three coats of two-component (2K) waterborne finish.
- [Serrano](https://www.parksinta.com/en/projects/solid-walnut-chestnut-flooring-serrano-madrid/) (Salamanca): checkerboard of light chestnut and dark walnut, with Bona Traffic HD Satinado finish.
- [Doctor Arce](https://www.parksinta.com/en/projects/oak-floor-inlay-restoration-doctor-arce-el-viso/) (El Viso): oak boards with inlays and dark water stains, with three coats of Bona Traffic HD Satinado waterborne finish.
- [Palacio de Fernán Núñez](https://www.parksinta.com/en/projects/fernan-nunez-palace-historic-parquet-restoration/): marquetry of European oak, Spanish walnut and Iberian chestnut, with three coats of ultra-matte two-component (2K) waterborne finish.

## Red tropical board floors

In jatoba, merbau, elondo and other red woods, the base color comes from the wood’s own extractives, not from a varnish. Extractives are the substances the wood forms in the heartwood, the core of the trunk. Many are water-soluble, as noted in the [Wood Handbook of the U.S. Forest Service](https://research.fs.usda.gov/treesearch/62269). Sanding removes the old darkened varnish, but not that base color.

Freshly sanded wood also tends to darken in light. In a [laboratory test with simulated sunlight](https://acta.mendelu.cz/artkey/acu-201005-0001_colour-of-tropical-wood-and-discolouration-due-to-simulated-sunlight.php), sanded jatoba dropped from 50 to 39 in lightness in 24 hours, with unfinished pieces of wood under a lamp that imitates the sun (0 is black and 100 is white).

Any clear finish makes you see deeper into the wood and brings out its natural color more, the Wood Handbook explains. A half-varnished jatoba shows it: the varnished part is redder than the sanded part.

![Tarima de jatobá a medio barnizar: la parte con barniz, de tono rojo oscuro y brillante, junto a la parte lijada, de tono pardo grisáceo](https://www.parksinta.com/wp-content/uploads/2018/01/IMAG0266-scaled-2048x1150.jpg.webp)

*Jatoba half-coated with waterborne polyurethane: the finished area looks redder than the sanded one. Source: ParkSinta archive.*

Lightening them has three steps, from least to most. The first, the simplest, is an ultra-matte or natural finish: it does not usually alter the pH or the color of the wood, and it lightens the reds and browns. The second is a one-coat stain, which dulls the red and leaves a brownish tone. The third, with two coats, gives a fully whitewashed effect, which is a color effect and not chemical bleaching.

![Suelo de jatobá en espiga con barniz brillante, de tono miel rojizo](https://www.parksinta.com/wp-content/uploads/2026/11/aclarar-parquet-antiguo/tira-1-jatoba-barniz-agua-brillo.webp)

![Tarima de jatobá en tonos ámbar y pardo, con acabado mate](https://www.parksinta.com/wp-content/uploads/2026/11/aclarar-parquet-antiguo/tira-2-jatoba-ultramate.webp)

![Tarima de jatobá de tono pardo claro rosado, junto a un rodapié de color ámbar](https://www.parksinta.com/wp-content/uploads/2026/11/aclarar-parquet-antiguo/tira-3-jatoba-una-mano-de-tinte-blanco.webp)

![Suelo de tono blanco grisáceo liso, sin veta visible, junto a un rodapié blanco y una alfombra beige](https://www.parksinta.com/wp-content/uploads/2026/11/aclarar-parquet-antiguo/tira-4-jatoba-dos-manos-de-tinte-blanco.webp)

From left to right: 1, gloss waterborne finish; 2, ultra-matte finish; 3, one coat of white stain; 4, two coats of white stain. Source: ParkSinta archive.

With two coats of white stain the boards can barely be told apart. The jump from one coat of stain is large.

![Salón con el suelo de tono blanco liso, sin veta visible, junto a una alfombra beige y una estantería](https://www.parksinta.com/wp-content/uploads/2026/11/aclarar-parquet-antiguo/tarima-jatoba-dos-manos-de-tinte-blanco.webp)

*Jatoba with two coats of white stain: fully whitewashed effect. Source: ParkSinta archive.*

In the staining steps, the red is first isolated with a sealer coat and finished with a Raw or matte finish. The sealer matters because, without a layer that blocks the extractives, they can bleed through as many coats of finish as are applied, the Wood Handbook warns. It is the system manufacturers such as Bona have recommended to us.

In merbau and iroko, Deva’s technical data sheet calls for a [preliminary test](https://quideva.com/wp-content/uploads/2023/04/TRANSIT-PLUS.0.pdf) before finishing the whole surface, because of the fats and oils in the wood. In restoration work, the color test is done and quoted separately. We do not do chemical bleaching.

## Staining and lightening

Waterborne polyurethane usually makes the floor lighter than old varnishes, and you can decide how much without going as far as staining. We tone or lighten with two-component (2K) waterborne finishes from Bona and Deva. Staining is the next step: we do it with Bona Craft Oil, a neutral or colored oil that goes on as the first coat, with the finish on top. Spirit-based or water-based stains we keep for spot repairs.

Staining gives the wood color, and varnishing seals and protects it. With a stain, the tone is chosen from a range and always tested on the specific wood, because each species responds differently.

## What cannot be done

- **The yellow tone of pitch pine.** It is not neutralized: it is softened with different products.
- **Lightening with no wood left to sand.** In a nailed board floor, the tongue is the ridge each board uses to lock into the next. With less than 2–3 mm of wood above it, restoring is barely viable. In a glued parquet, a marquetry tile or a panel, the limit is the layer of exposed wood on top of the base. The wood that is left is measured by looking at the edge of a board. If it cannot be seen, we ask how old the floor is and how many times it has been sanded. A professional also sounds it out: the sound is a good clue to the thickness and to whether the boards are well bonded, but it is not conclusive and does not replace an accurate measurement.
- **Lightening just by recoating.** Recoating opens the pores of the previous film with a fine abrasive and removes no wood. If there are traffic areas with no varnish left, the new varnish does not cover the difference in tone between the oxidized bare wood and the wood that still has film on it.

## The effect of light

Wood changes tone in light. At La Piovera, the pitch pine boards had areas faded by direct sun in the living rooms and hallways. Sanding evened them out: sun fading does not go very deep into the wood.

Bona notes in its FAQ that yellowing is part of the character of the wood and is hard to avoid, and recommends limiting exposure to the sun. According to Bona, a stain with a non-yellowing varnish helps slow the process.

![Suelo de pino melis de veta marcada con una franja de sol y otra de sombra, junto a una plataforma de madera con grava blanca](https://www.parksinta.com/wp-content/uploads/2026/10/aclarar-parquet-antiguo/tarima-pino-melis-sol-y-sombra-piovera-hortaleza.webp)

*La Piovera (Hortaleza): wide pitch pine boards, with sun coming in through the window. Source: ParkSinta archive.*

## Price and timing

As of October 2026, [sanding and finishing](https://www.parksinta.com/en/hardwood-floor-sanding-madrid/) starts at €25/m² + VAT with Deva Transit Plus 2K waterborne finish. With a Deva natural or ultra-matte finish, from €29/m² + VAT. We quote jobs from 40 m² in the city of Madrid and Pozuelo. Between 40 and 90 m², they take 2 to 5 days, depending on the level of restoration and the state of the floor.

But sanding and finishing are only one part. A restoration can be more or less complex: it depends on the original state of the floor, on what the client expects and on the use it will get. At the Defensor del Pueblo, for example, it was a full restoration: sanding, varnishing, replacing boards and battens, and staining. The final price depends on all of that and on special finishes, such as extra coats or stains. We quote after visiting the home.

## Reference projects

![Tarima de roble macizo con acabado natural en un chalet de Húmera (Pozuelo)](https://www.parksinta.com/wp-content/uploads/2024/04/Parquet-Multicapa-Roble-Humera-Parksinta.webp)

*[Húmera](https://www.parksinta.com/en/projects/engineered-oak-natural-finish-restoration-humera-pozuelo/) (Pozuelo): engineered oak parquet with old darkened varnish, finished with Deva Transit Plus Natur.*

![Tarima de tablas anchas de pino melis viejo, restaurada, en una vivienda de La Piovera (Hortaleza)](https://www.parksinta.com/wp-content/uploads/2024/04/Tarima-pino-melis-viejo-Piovera-Parksinta-2.webp)

*[La Piovera](https://www.parksinta.com/en/projects/old-pitch-pine-heavy-duty-finish-la-piovera/) (Hortaleza): wide old pitch pine boards, with areas faded by the sun.*

![Tarima de pino melis viejo restaurada en la sede del Defensor del Pueblo](https://www.parksinta.com/wp-content/uploads/2024/11/Defensor-del-Pueblo-tarima-maciza-parksinta-9.webp)

*[Defensor del Pueblo](https://www.parksinta.com/en/projects/ombudsman-headquarters-pitch-pine-restoration/) (Madrid Centro): old pitch pine boards, full restoration with staining and three coats of varnish.*

![Tarima de pino melis viejo en espiga, restaurada, en Monte Esquinza (Chamberí)](https://www.parksinta.com/wp-content/uploads/2016/02/Tarima-maciza-pino-melis-viejo-despu%C3%A9s-2.jpg)

*[Monte Esquinza](https://www.parksinta.com/en/projects/century-old-pitch-pine-floor-restoration-monte-esquinza/) (Chamberí): old pitch pine with the varnish darkened by oxidation.*

Want to lighten an old parquet?

Ask us for a site visit before choosing the tone: we look at the floor and give you a quote. At our Chamberí space there is a [sample board of sheens and stains](https://www.parksinta.com/en/wood-floor-finishes-madrid/) on hardwoods. A similar case: [Engineered oak parquet restoration with a natural finish – Húmera (Pozuelo)](https://www.parksinta.com/en/projects/engineered-oak-natural-finish-restoration-humera-pozuelo/).

[Parquet restoration and sanding](https://www.parksinta.com/en/hardwood-floor-sanding-madrid/)
 [📞 +34 91 543 90 62](tel:+34915439062)
 [Book an appointment in Chamberí (Donoso Cortés 24)](https://www.parksinta.com/en/contact/)
